The most prestigious law school admissions discussion board in the world.
|
 |
 
|
I decided to prole goy DIY some of my house improvements. Advice on cabinets?
Poast new message in this thread
Date: May 6th, 2026 10:41 AM Author: lex I hope this is the right place for this pressing q. I bought two pre-made ones from home depot and need to put them in a kitchen corner so that Real Men I've hired can put countertop there. Do I just try my god damndest with a level and shims if need be, then use a stud finder and bracket everything in and put a bunch of drywall screws everywhere? What am I missing here? (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869492) |
 |
Date: May 6th, 2026 11:47 AM Author: Diamond Dallas Chad No, "drywall screws" are the last thing you want to be using. They won't be nearly long enough, may not even reach the studs. Assuming you aren't putting up any plywood or any other kind of backing, you want some wood screws long enough to go through what you're mounting, the drywall, and still have a good 1.5 inches of thread to penetrate the studs. I would use star drive screws, I don't understand why square drive are allowed to be made and they should be banned. M210 stud finder will save some annoyance from missed studs. (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869604) |
Date: May 6th, 2026 10:43 AM Author: 5000 shades of brown embarrassingly prole (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869496) |
|
Date: May 6th, 2026 10:47 AM Author: lex My dad had a prole upbringing & I aspire to fold some of his values into my affected patrician persona (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869500) |
|
Date: May 6th, 2026 11:27 AM Author: lsd 180 (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869574) |
|
Date: May 6th, 2026 10:45 AM Author: should of you have to knock out the drywall and put in cabinet drywall first iirc (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869499) |
|
Date: May 6th, 2026 10:48 AM Author: lex What's cabinet drywall? (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869502) |
|
Date: May 6th, 2026 11:31 AM Author: Diamond Dallas Chad Not a thing but you may need to attach plywood to your studs, depending on the setup. (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869579) |
|
Date: May 6th, 2026 10:48 AM Author: .,.,.,.,.,...,.,,.,,.....,.,..,.,,...,.,.,,...,. I know you're suffering from brain damage, but did you try YouTube? (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869503) |
|
Date: May 6th, 2026 10:50 AM Author: lex What fun is that? (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869507) |
|
Date: May 6th, 2026 10:53 AM Author: .,.,.,.,.,...,.,,.,,.....,.,..,.,,...,.,.,,...,. I dunno I've never experienced brain damage before (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869516) |
|
Date: May 6th, 2026 11:24 AM Author: gibberish (?) Lol (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869570) |
|
Date: May 6th, 2026 10:57 AM Author: The Redwall Cinematic Universe just watch youtube videos and ask AI
not flame |
|
Date: May 6th, 2026 10:58 AM Author: The Redwall Cinematic Universe also make sure your fiance isn't there or watching until you're almost finished, then "accidentally" arrange for her to come in to see you do the easy part (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869522) |
|
Date: May 6th, 2026 11:24 AM Author: gibberish (?) YouTube. There is a certain way to level for counter tops and you need to make sure the same level was transferred to each surface getting topped. (http://www.autoadmit.com/thread.php?thread_id=5864261&forum_id=2...id.#49869571) |